| Northern Lake Sailboats | Prices effective July 15, 2008 | ||||||
| 1180 Port Road | Pricing and sprcifications subject to change without notice | ||||||
| Port Edwards, WI 54469 | |||||||
| 715-887-3020 | |||||||
| Notes: | Older Butterflys with serial number 8011 and below use the Old Style (OS) rudder system. | ||||||
| A part kit includes indented listed below. All prices are for a quantity of one | |||||||
| Quantity of parts used are shown in () | |||||||
| Item | Description | Price | Item | Description | Price | ||
| 1 | BUTTERFLY HULL ASSEMBLY | $3,080.00 | 45 | flathead machine screws 8-32 x 3/4" (2) | $0.28 | ||
| 2 | vinyl rub rail | $71.50 | 46 | square nuts 8-32 (2) | $0.28 | ||
| 3 | vinyl trim cap | $6.60 | 47 | mast base | $27.50 | ||
| 3A | panhead tapping screw 1" x 8 | $0.28 | 48 | stay set | $88.00 | ||
| 5 | hull name, Butterfly | $5.50 | 49 | side stay, with tang (2) | $27.50 | ||
| 6 | bow fitting | $27.50 | 50 | forestay, with hound | $33.00 | ||
| 7 | panhead machine screws 10-24 x 1" (4) | $0.28 | 51 | tang bolt hexhd mch scr 1/4-20 x 2 1/2" | $1.10 | ||
| 8 | shroud anchor plate (2) | $8.80 | 52 | nylock nut 1/4 - 20 | $0.55 | ||
| 9 | panhead machine screws 1/4-20 x 1" (4) | $0.55 | 53 | shroud adjuster (3) | $8.80 | ||
| 10 | mast step | $22.00 | 54 | clevis pin and ring, set of 3 | $4.95 | ||
| 11 | panhead tapping screws 1" x 10 (3) | $0.28 | 55 | BOOM ASSEMBLY, without gooseneck | $192.50 | ||
| 12 | spray rail | $148.50 | 56 | extrusion, boom | $99.00 | ||
| 13 | ovalhead tapping screws 3/4" x 8 (13) | $0.28 | 57 | outhaul casting | $22.00 | ||
| 14 | daggerboard snubber kit | $33.00 | 58 | st. st. poprivets (2) | $0.55 | ||
| 15 | caps (2) | $11.00 | 59 | eyestraps, block (3) | $2.20 | ||
| 16 | spacers (2) | $3.30 | 60 | st. st. poprivets (6) | $0.55 | ||
| 17 | rubber blade (2) | $4.40 | 60A | clamcleat, outhaul | $4.35 | ||
| 18 | ovalhead tapping screws 3/4" x 8 (8) | $0.28 | 60B | ovalhead tapping screw 3/4" x 8 (2) | $0.28 | ||
| 19 | hand rail (2) with spacers (4) | $27.50 | 61 | gooseneck casting | $22.00 | ||
| 20 | handrail spacers (4) | $2.20 | 62 | st. st. poprivets (4) | $0.55 | ||
| 21 | panhead machine screws 1/4-20 x 1 1/2" | $1.10 | 63 | gooseneck assembly | $44.00 | ||
| 22 | bridle eyestrap | $2.20 | 64 | clevis pin and ring, gooseneck | $1.65 | ||
| 23 | bridle w/ shackles | $19.80 | 65 | DAGGERBOARD ASSEMBLY | $176.00 | ||
| 24 | gudgeon bracket | $33.00 | 66 | daggerboard bumpers, with bolt and nut | $7.70 | ||
| 25 | panhead machine screws 10-24 x 1" (4) | $0.28 | 67 | RUDDER AND TILLER ASSEMBLY | $357.50 | ||
| 26 | lockwasher 10 (4) | $0.28 | 68 | rudder head assembly | $121.00 | ||
| 27 | drain plug assembly | $5.50 | 69 | tiller reinforcer | $5.50 | ||
| 28 | panhead tapping screws 1" x 10 (4) | $0.28 | 70 | panhead machine screw 5/16 - 18 x 2" | $1.10 | ||
| 29 | MAST ASSEMBLY | $495.00 | 71 | nylock jam nut 5/16 x 18 | $1.10 | ||
| 30 | upper mast assembly | $247.50 | 72 | pintle, upper | $11.00 | ||
| 31 | extrusion, upper mast | $192.50 | 73 | panhead machine screw 8-32 x 1 1/4" | $0.28 | ||
| 32 | mast head | $38.50 | 74 | panhead machine screw 8-32 x 1/2" | $0.28 | ||
| 32A | clam cleat, halyard | $3.85 | 75 | nylock nuts 8-32 (2) | $0.55 | ||
| 32B | ovalhead tapping screw 3/4 x 8 | $0.28 | 76 | safety ring | $0.28 | ||
| 33 | st. st. pop rivets (2) | $0.55 | 77 | pintle, lower | $11.00 | ||
| 34 | splice half | $33.00 | 78 | panhead machine screws 8-32 x 1 1/2" | $0.28 | ||
| 35 | st. st. pop rivets (4) | $0.55 | 79 | panhead machine screws 8-32 x 1/2" | $0.28 | ||
| 36 | lower mast assembly | $247.50 | 80 | nylock nut 8-32 (3) | $0.55 | ||
| 37 | extrusion, lower mast | $192.50 | 81 | safety spring | $4.40 | ||
| 38 | splice half | $33.00 | 82 | panhead machine screw 8-32 x 1/2" (2) | $0.28 | ||
| 39 | st. st. poprivets (4) | $0.55 | 83 | rudder disc | $16.50 | ||
| 40 | internal reinforcer | $33.00 | 84 | rudder friction disc | $5.50 | ||
| 41 | st. st. poprivets (4) | $0.55 | 85 | ovalhead machine screw 1/4-20 x 1 1/2" | $1.10 | ||
| 42 | halyard cleat | $5.50 | 86 | nylock nut 1/4 - 20 | $0.55 | ||
| 43 | ovalhead tapping screws 3/4" x 8 (2) | $0.28 | 87 | rudder blade | $88.00 | ||
| 44 | downhaul cleat | $5.50 | 88 | rudder spring | $4.40 | ||
| 89 | panhead machine screws 8-32 x 3/4" | $0.28 | |||||
| 90 | nylock nut 8-32 (2) | $0.55 | |||||
| Item | Description | Price | Item | Description | Price | ||
| 91 | tiller and extension assembly | $110.00 | Old Style Parts | ||||
| 92 | tiller | $49.50 | 150 | upper gudgeon, vinyl trim cap, OS | $38.50 | ||
| 93 | tiller stop | $2.20 | 151 | ovalhead machine screws 8-32 x 1" (4) | $0.28 | ||
| 94 | tiller friction plate | $2.20 | 152 | nylock nut 8-32 (4) | $0.55 | ||
| 95 | tiller extension | $55.00 | 153 | lower gudgeon, OS | $27.50 | ||
| 96 | panhead tapping screws 1" x 10 (2) | $0.28 | 154 | ovalhead machine screws 8-32 x 1" (2) | $0.28 | ||
| 97 | retainer, tiller extension | $2.20 | 155 | RUDDER AND TILLER ASSEMBLY, OS | $357.50 | ||
| 98 | flathead tapping screw 1 1/2" x 6 | $0.28 | 156 | rudder head assembly, OS | $121.00 | ||
| 99 | Sail, all white | $434.50 | 157 | pintle, upper | $11.00 | ||
| 100 | Sail, colored, Rainbow | $434.50 | 158 | panhead machine screws 8-32 x 1 1/4" | $0.28 | ||
| 101 | Sail, colored, Blue Chip | $434.50 | 159 | nylock nut 8-32 (2) | $0.55 | ||
| 102 | Sail, colored, Fiesta | $434.50 | 160 | safety ring | $0.28 | ||
| 103 | Sail, colored, White with Spectrum Panel | $434.50 | 161 | pintle, lower | $11.00 | ||
| 103A | batten set | $23.10 | 162 | panhead machine screw 8-32 x 1 1/2" | $0.28 | ||
| 104 | batten, upper, 20" | $7.70 | 163 | panhead machine screw 8-32 x 1/2" | $0.28 | ||
| 105 | batten, middle and lower, 24" (2) | $7.70 | 164 | nylock nut 8-32 (2) | $0.55 | ||
| 106 | sailbag | $27.50 | 165 | safety spring | $4.40 | ||
| 107 | sail numbers (each) | $2.20 | 166 | panhead machine screw 1/4 - 20 x 2 1/2" | $0.28 | ||
| 108 | RIG PACK | $108.90 | 167 | rudder disc | $16.50 | ||
| 109 | mainsheet line 5/16" x 34' | $26.18 | 168 | rudder friction disc | $5.50 | ||
| 110 | blocks, mainsheet and traveller w/shackle (3) | $28.00 | 169 | ovalhead machine screw 1/4-20 X 1 1/2" | $1.10 | ||
| 111 | halyard line 3/16" x 36' | $13.86 | 170 | nylock nut 1/4 - 20 | $0.55 | ||
| 112 | halyard shackle | $6.60 | 171 | rudder blade | $88.00 | ||
| 113 | outhaul line 3/16" x 7' | $2.70 | 172 | rudder spring | $4.40 | ||
| 114 | downhaul line 3/16" x 3 1/2' | $1.35 | 173 | panhead machine screws 8-32 x 3/4" | $0.28 | ||
| 115 | Owner's Manual | $3.30 | 174 | nylock nut 8-32 (2) | $0.55 | ||
| Accessories | 175 | tiller and extension assembly, OS | $93.50 | ||||
| 116 | deck cover | $247.50 | 176 | hexhead machine screw 1/4 - 20 x 2 1/2" | $1.10 | ||
| 117 | spar bag | $55.00 | 177 | nylock nut 1/4 - 20 | $0.55 | ||
| 118 | padded board bag | $104.50 | 178 | tiller, OS | $49.50 | ||
| 119 | hiking strap | $39.60 | 179 | tiller stop | $2.20 | ||
| 121 | inspection port | $11.00 | 180 | tiller extension, OS | $38.50 | ||
| 122 | flathead tapping screws 1/2" x 6 (6) | $0.28 | 181 | trusshead machine screw | $0.55 | ||
| 123 | storage bag, regular (use with port) | $16.50 | 182 | nylon washer 1/4 | $0.28 | ||
| 124 | storage bag, large (use with port) | $22.00 | 183 | st. st. washer 1/4 | $0.28 | ||
| 125 | wind direction indicator, telo spar fly | $25.30 | 184 | nylock nut 1/4 -20 | $0.55 | ||
| 126 | air flow tells | $6.60 | 185 | shroud anchor plate, channel style, OS | $5.50 | ||
| 127 | adjustable outhaul kit | $7.15 | 186 | panhead machine screws 10-24 x 1" (4) | $0.28 | ||
| 128 | clamcleat | $4.68 | |||||
| 129 | ovalhead screws 1" x 8 (2) | $0.28 | |||||
| 130 | outhaul line | $1.93 | |||||
| 131 | Boom Vang Assembly | $104.50 | |||||
| 132 | boom vang arm | $49.50 | |||||
| 133 | roundhead machine screw (2) | $0.28 | |||||
| 134 | rod nuts (2) | $2.20 | |||||
| 135 | block, v jam | $26.24 | |||||
| 136 | clevis pin and ring | $1.65 | |||||
| 137 | boom vang hook | $5.50 | |||||
| 138 | block | $10.34 | |||||
| 139 | shackle | $3.08 | |||||
| 140 | boom vang line, 1/4" x 9' | $3.96 | |||||
| 141 | mounting bracket for s. cleat or ratchet block | $27.50 | |||||
| 142 | panhead tapping screws 1 x 14 (6) | $0.55 | |||||
| 143 | Harken Hexarachet | $58.14 | |||||
| 144 | Harken Swivel base and spring | $35.53 | |||||
| 145 | flathead machine screws 8-32 x 1" (4) | $0.28 | |||||
| 146 | nylock nut 8-32 (4) | $0.55 | |||||
| 147 | swivel camcleat | $57.31 | |||||
| 148 | flathead machine screw 8-32 x 1/2" | $0.33 | |||||
| 149 | nylock nut 8-32 (3) | $0.55 | |||||
| $- | |||||||
| 187 | Telescoping Tiller Extension 27" - 47" | $88.00 | |||||
| 188 | Seitech Dolly (beach trailer) | $368.50 | |||||
| 189 | Extrasport Life Vest U.S.C.G XS - XL | $55.00 | |||||
| 190 | Flotation Panel | $137.50 | |||||